Not always real robot can be used, two versions have been created:

• ROS Noetic simulation
• Real TurtleBot control

Simulated environment has been coded with Python3 on ROS Noetic. First of all, open Gazebo simulator, in this case, ROS defalut house map is used. On one terminal execute following commands:

$ export TURTLEBOT3_MODEL=waffle
$ roslaunch turtlebot3_gazebo turtlebot3_house.launch

Open new terminal and execute navigation module (is is necessary to have previosly mapped the area):

$ export TURTLEBOT3_MODEL=waffle
$ roslaunch turtlebot3_navigation turtlebot3_navigation.launch map_file:=$HOME/house.yaml

Note: Both files (.yaml and .pgm) must be on HOME directory.

This will open a rviz window where robot, map and localization point cloud can be seen. Use 2D POSE ESTIMATE to estimate the current position of the robot in the map.

Execute code main.py and open Andorid app. TCP conexion uses port:12343

Real environment has been coded using Python2 on ROS Kinetic. TurtleBot inicialization is needed, so this following commands must be launched on different terminals:

$ roslaunch turtlebot_bringup minimal.launch
$ roslaunch turtlebot_bringup hokuyo_ust101x.launch

Open new terminal and execute the navigation module:

$ export TURTLEBOT_3D_SENSOR=astra
$ roslaunch turtlebot_navigation amcl_demo.launch map_file:=$HOME/house.yaml

Note: Both files (.yaml and .pgm) must be on HOME directory.

TurtleBot can't open an rvizwindow so another device is needed. On new device execute setvars.bash, open a new terminal and execute rviz:

$ rosrun rviz rviz

rviz window will be opened. Add modules to show robot, map and point cloud.

Execute code main.py and open Andorid app. TCP conexion uses port:12343

Note: in case of port malfunction, change the port and restart the application.

Click on the gif to see a video of the project in action:

Built by:

• Adrián Sanchis Reig
• Rafael Antón Cabrera
• Andrés Gómez-Caraballo Yélamos
• Àngel Alepuz Jerez