HomeAssistant - Polyaire AirTouch 4 Integration

Related tags

Hardwarehass-airtouch4-platform
Overview

HomeAssistant - Polyaire AirTouch 4 Integration

Custom integration to add an AirTouch 4 AC Controller

Installation:

Copy contents of custom_components/polyaire/ to custom_components/polyaire/ in your Home Assistant config folder.

Installation using HACS

HACS is a community store for Home Assistant. After installation, add this repository to HACS and install the polyaire integration.

Requirements

AirTouch 4 console IP address is required when installing the integration

Services

This custom component creates:

  • one device for each AC unit installed
  • one climate entity for each AC unit installed
  • one fan entity for each group defined, which controls the zone damper
  • one climate entity for each group with ITC installed, which controls the group temperature

For each group with ITC, the fan entity can switch between 2 profiles:

  • Damper - which allows direct damper control via the fan
  • ITC - which allows for temperature control using the ITC
Comments
  • Sensors not updated automatically when changes are made on wall controllers

    Sensors not updated automatically when changes are made on wall controllers

    Updated to version 1.3 (PUSH) which seems to work except that sensors aren't updating automatically when changes are made to target temperature or zone on/off state, either on the AirTouch 4 tablet or on ITC switches.

    I can force updates to happen for all zones by using NodeRed to change the target temperature of a single zone by 0.1 degree. I've set NodeRed to do that every minute. Hopefully you can find some way of automating that in the integration?

    opened by spry-salt 7
  • Room Thermostats all show as Cooling even when heating

    Room Thermostats all show as Cooling even when heating

    I have Airtouch4 in home assistant then linked to HomeKit. Firstly, it works great thanks.

    But the room thermostats in HomeKit all display 'Cooling to ..' when turned on. This occurs no matter the mode of the main thermostat. For example we now have heating running but rooms still read as cooling.

    Is it possible to adjust this?

    Thanks

    opened by kylecwhite 6
  • HA Reboot requires Integration disable/enable

    HA Reboot requires Integration disable/enable

    After a reboot of home assistant the integration has an error stating it is unable to contact the AirTouch controller. Disabling and re-enabling the integration resolves the issue.

    Have looked at the home assistant logs but nothing is posted in there to explain the issue

    opened by salty2011 5
  • Current Temperature as its own sensor

    Current Temperature as its own sensor

    Problem Statement When using something like Dwains dashboard the current temperature is not display while AC unit is set to off, and when it is on it will display the desired temp instead of the current temp

    Possible Fix Not entirely sure, but perhaps the below

    • Move current_temperature attribute to its own sensor and make the attribute temperature
    • on the itc sensor rename temperature to target_temperature
    opened by brine0m 1
  • Set HVAC mode doesn't work if target mode is already current mode

    Set HVAC mode doesn't work if target mode is already current mode

    When trying to create automations I found that if you try to set the HVAC mode of an ITC to "off" when it is already "off" this can result in the ITC switching to auto.

    opened by MinimalMule 0
  • Push subscription seems to expire after a quantity of hrs

    Push subscription seems to expire after a quantity of hrs

    I haven't been able to calculate the exact duration, but if no command is sent from HA to AT4 and everything is idle, after 10-24hrs I stop receiving ITC temperature updates. As soon as I touch/adjust any parameter in HA, everything comes back to life again for another 10 or so hours.

    I've yet to check if during a time HA is not receiving updates, if I make a change within AT4 things come back to life again.

    Maybe we need a 6-hourly poll just to ensure things stay active? [edit] If the master 'AC' is turned on/off in HA, this does not trigger an update to the ITC states. A change to a zone is required for updates to start flowing in again.

    Screenshot 2021-12-03 092627

    opened by t1mb0 5
Releases(v.1.4.4)

  • v.1.4.4(Jul 15, 2022)

    Changes:

    • fixed bug that would disconnect the plugin very often and cause slowdowns
    • fixed bug that would add ITC battery to zones without batteries

    Enjoy! If you found this useful, say Thank You! with a beer.

    Source code(tar.gz)
    Source code(zip)

  • v.1.4.3(Jul 5, 2022)

    Changes:

    • added spill sensor and turbo sensor
    • added workaround for zones not updating temperatures

    It's been confirmed with Polyaire that there's an issue and update messages are not being sent when zones change temperatures. Current workaround is to ask for zone update messages every time there's an AC update message arriving, this should be every minute or so.

    Source code(tar.gz)
    Source code(zip)

  • v.1.4.2(Jun 29, 2022)

    Improvements:

    • add preset mode to zone thermostats
    • do not send unnecessary messages (airtouch snooping)

    Bug fixes:

    • fixes a bug where AC changes does not update zone thermostats
    Source code(tar.gz)
    Source code(zip)

  • v.1.4.1(Jun 29, 2022)

    Improvements:

    • add preset mode to zone thermostats
    • do not send unnecessary messages (airtouch snooping)

    Bug fixes:

    • fixes a bug where AC changes does not update zone thermostats
    Source code(tar.gz)
    Source code(zip)

  • v.1.4.0(Jun 28, 2022)

    Improvements:

    • Added ITC low battery as binary_sensor (On = low battery)
    • Allow damper setting to be readable while in ITC mode (Note: some cards might still allow to change the value; this will be ignored and a refresh will show the true value...)
    Source code(tar.gz)
    Source code(zip)

  • v.1.3.2(Jun 28, 2022)

    Updated airtouch communication protocol to check for 1 address byte instead of 2 in message header. Should fix issues where some messages where ignored and entities in HA were not updated.

    Source code(tar.gz)
    Source code(zip)

  • v.1.3.1(Jun 24, 2022)

    Changes:

    • 1.3.1: allow more time to set up airtouch connection
    • 1.3.0: improvements in airtouch connection handling

    Note: starting with v.1.3, entities ids have been changed to include entity type. You need to change your cards, scripts and automations according to the new format:

    • AC unit: climate.[name] -> climate.ac_[name] (e.g. climate.ac_lg)
    • Damper: fan.[name] -> fan.damper_[name] (e.g. fan.damper_living)
    • ITC thermostat: climate.[name] -> climate.itc_[name] (e.g. climate.itc_master)
    Source code(tar.gz)
    Source code(zip)

  • v.1.3(Jun 23, 2022)

  • v.1.2.3(Nov 6, 2021)

  • v.1.2.2(Nov 1, 2021)

  • v.1.2.1(Nov 1, 2021)

  • v.1.2.0(Oct 31, 2021)

  • v.1.1.2(Oct 30, 2021)

  • v.1.1.1(Oct 30, 2021)

  • v.1.1.0(Oct 30, 2021)

Owner
GitHub Repository
This is a Virtual Keyboard which is simple yet effective to use.

Virtual-Keyboard This is a Virtual KeyBoard which can track finger movements and lets you type anywhere ranging from notepad to even web browsers. It

Jehan Patel 3 Oct 01, 2021
Port of Uxn to digital hardware in the Logisim simulator

Uxn-Logisim Implements the Uxn instruction set in digital hardware. Very WIP. Contents cpu.circ - The Logisim file microcode.mc - Microcode source fil

DeltaF1 11 Mar 27, 2022
Create a low powered, renewable generation forecast display with a Raspberry Pi Zero & Inky wHAT.

GB Renewable Forecast Display This Raspberry Pi powered eInk display aims to give you a quick way to time your home energy usage to help balance the g

Andy Brace 32 Jul 02, 2022
Cow Feeder is a bot automatically execute trade on cowswap

Cow Feeder is a bot automatically execute trade on cowswap, includes functions: Monitoring Ethereum network gas price and execute trade whe

6 Apr 20, 2022
A dashboard for Raspberry Pi to display environmental weather data, rain radar, weather forecast, etc. written in Python

Weather Clock for Raspberry PI This project is a dashboard for Raspberry Pi to display environmental weather data, rain radar, weather forecast, etc.

Markus Geiger 1 May 01, 2022
A install script for installing qtile and my configs on Raspberry Pi OS

QPI OS - Qtile + Raspberry PI OS Qtile + Raspberry Pi OS :) Installation Run this command in the terminal

RPICoder 3 Dec 19, 2021
Testing out some (stolen) DMA code for RP2040 Micropython

RP2040_micropython_dma testing out some (stolen) DMA code for RP2040 Micropython. Heavy inspiration and some code from https://iosoft.blog/2021/10/26/

2 Dec 29, 2022
Code for the paper "Planning with Diffusion for Flexible Behavior Synthesis"

Planning with Diffusion Training and visualizing of diffusion models from Planning with Diffusion for Flexible Behavior Synthesis. Guided sampling cod

Michael Janner 310 Jan 07, 2023
[unmaintained] WiFi tools for linux

Note: This project is unmaintained. While I would love to keep up the development on this project, it is difficult for me for several reasons: I don't

Rocky Meza 288 Dec 13, 2022
Various programs in Atari BASIC for #FujiNet for Atari 8-bit

FujiNet Various programs in Atari BASIC for #FujiNet for Atari 8-bit FujiNet-3D Tic Tac Toe In 1978, Scott Adams wrote a 3-D Tic Tac Toe game, for pla

Kay Savetz 2 Jan 01, 2022
This OctoPrint plugin will make the initial connection to 3D Hub a breeze

3D Hub Connector This OctoPrint plugin will make the initial connection to 3D Hub a breeze. In future it will help in setting up a tunnel connection a

3D Hub 2 Aug 03, 2022
Open-Source board for converting RaspberryPI to Brain-computer interface

The easiest way to the neuroscience world with the shield for RaspberryPi - PIEEG (website). Open-source. Crowdsupply This project is the result of se

Ildaron 436 Jan 01, 2023
Transform a Raspberry Pi into a network diagnostic machine.

EtherView Last updated jan 30, 2022. Welcome to the EtherView project! This is a project to transform a RaspberryPi into a portable network diagnostic

1 Jan 30, 2022
A DiY holiday project to demonstrate how you can send data from adafruitIO cloud to a balena edge device

holiday-star balena ❤️ adafruitIO Introduction A DiY holiday project to demonstrate how you can send data from adafruitIO cloud to a balena edge devic

Ayan Pahwa 3 Dec 20, 2021
An open source operating system designed primarily for the Raspberry Pi Pico, written entirely in MicroPython

PycOS An open source operating system designed primarily for the Raspberry Pi Pico, written entirely in MicroPython. "PycOS" is an combination of the

8 Oct 06, 2022
Brogrammer-keyboard - FIrmware for the Brogrammer Keyboard v1.0

Brogrammer Keyboard Firmware The package contains the firmware that runs on the Brogrammer Keyboard v1.0 See https://imgur.com/a/oY5QZ14 This keyboard

Devin Hartleben 1 Apr 21, 2022
Automate gate/garage door opening via 433.92MHz emitter with Raspberry Pi, Home Assistant and Homekit.

Automate opening your garage door / gate Summary This project sums up how I automated opening my garage door using a Raspberry PI, a 433Mhz emitter, H

Julien Fouilhé 29 Nov 30, 2022
LedFx is a network based LED effect controller with support for advanced real-time audio effects

Welcome to LedFx ✨ -Making music come alive! LedFx website: https://ledfx.app/ What is LedFx? What LedFx offers is the ability to take audio input, an

786 Jan 02, 2023
Intel Realsense t265 into Unreal Engine

t265_UE Intel Realsense t265 into Unreal Engine. Windows only, and Livelink plugin is 4.26.2 only at the moment. Might recompile it for different vers

Bjarke Aagaard 30 Jan 02, 2023
Modi2-firmware-updater - MODI+ Firmware Updater With Python

MODI+ Firmware Updater 실행 준비 python3(파이썬3.9 혹은 그 이상의 버전)를 컴퓨터에 설치 python3 -m pip

LUXROBO 1 Feb 04, 2022